<h3 style="color: rgb(146, 208, 80);">Crop Suitability</h3>
-
<h4>Paddy</h4>
Target Disease
Pesticide Rate
per 10L WaterPesticide Rate
per hectareSpray Volume
per hectareMaximum number of sprays
Sheath Blight
20ml
300ml
150 Liter
2 times per season
Do not harvest the crop for at least 60 days after the last spraying.
Prohibited Period of Re-entering the Treatment Area (REI): 12 hours.
Product application information:
- Mixing Guide:
It is recommended to use knapsack sprayer with cone nozzle. Fill up half of the tank with clean water. Add in Belanty® 34.9 SC by following the recommendation rate in label then mix it. Next, add the remaining clean water required and stir. Do not use higher rate than recommended. Do not keep the remaining Belanty® 34.9 SC mixture in the sprayer tank.
- Spraying Guidelines:
Spray when symptom begin to show. For good control, spray thoroughly onto the upper and lower surfaces of the leaves. Repeat the spraying every 20 days when necessary, only. DO NOT use more than 2 sprayings per season, the first spraying on days 30-35 and the second spraying on days 40-45 after sowing. If the treatment need to be repeated, use Belanty® 34.9 SC alternately with fungicide from the other group with different mode of action.
5 Golden rules when handling Crop protection products:
- Read product label before use.
- Always check and ensure that spray equipment are in good working condition.
- Make sure to wash and clean right after spraying.
- Always be careful and maintain caution in using any crop protection products.
- Always use appropriate PPE during mixing and application: gloves, goggles, long sleeves, long pants, rubber boots, hat.