Skip to main content
This site is best viewed using the current browser version of Chrome, Firefox, Safari, Edge. If you are using an out-of-date browser version or unsupported browser version, you may not experience the complete effect when viewing the site.
Inveris G75 Packshot - BASF Malaysia

Inveris G75

Insecticide

Active ingredient(s): Afidopyropen 4.95% w/w + Abamectin 2.47% w/w   
Formulation: Dispersible Concentrate (DC)

Benefits

  • Effective control of sucking pests like Whitefly.
  • Fast feeding cessation.

<h3 style="color: rgb(146, 208, 80);">Crop Suitability</h3>

  • <h4>Chili</h4>

    Pest
    Pesticide Rate 
    per 10L Water
    Pesticide Rate 
    per hectare
    Spray Volume 
    per hectare
    Maximum Number
    per sprays
    Tobacco Whitefly
    8ml
    800ml
    1000 Liter
    2 times per annum
    Do not harvest crop at least 7 days after last spray.
    Prohibited Period of Re-entering the Treatment Area (REI): 24 hours.

Product application information:

  • Mixing Guide:

It is recommended to use knapsack sprayer with cone nozzle. Fill up half of the tank with clean water. Add in Inveris G75 by following the recommendations rate in label then mix it. Next add the remaining clean water required and stir. Do not use at a higher rate than recommended. Do not keep the remaining Inveris G75 mixture in the sprayer tank.

  • Spraying Guidelines:

Spray when the attack reaches the threshold level of economy (ETL). For good control, spray thoroughly onto the upper and lower surfaces of the leaves. Repeat the spray every 7 days, if needed. DO NOT more than 2 spraying per season. If the treatment need to be repeated, use Inveris G75 alternately with pesticides from other groups with different modes of action. 

<h3 style="color: rgb(146, 208, 80);">Downloads</h3>

5 Golden rules when handling Crop protection products:

  • Read product label before use.
  • Always check and ensure that spray equipment are in good working condition.
  • Make sure to wash and clean right after spraying.
  • Always be careful and maintain caution in using any crop protection products.
  • Always use appropriate PPE during mixing and application: gloves, goggles, long sleeves, long pants, rubber boots, hat.